Keys To Maintaining Urethane Rollers Used On Conveyor Systems

29 August 2022
 Categories: Industrial & Manufacturing, Blog

Urethane rollers make for great conveyor belt resources because of their durability and smoothness. If you want to get as many years out of them as possible, take the following maintenance steps.

Check On Them Daily

Even though urethane rollers are well-built, you still want to make sure they're structurally sound before heavily relying on them using a conveyor system. A daily inspection schedule would suffice as far as assessing roller condition and making sure no red flags are present.

You can go through each roller on your conveyor belt and thoroughly check them over. If you don't see any problems like bent portions or chipped-off areas, you can move on to the next roller. Then if there are rollers with structural problems, you can service them before using the conveyor system again. 

Hire Professionals For Repairs

If there is structural damage identified with any of your work site's urethane rollers, it's important to have it repaired by a true professional. Then you can trust the repair will be satisfactory and ultimately help the urethane rollers perform how they're supposed to for as long as possible.

You just need to verify the repair contractor has experience fixing urethane rollers in particular and outlines the right repair strategy based on how your urethane rollers are damaged. Then whether they're out of position or starting to break down because of environmental conditions, the repair contractor can make the necessary corrections and ideally help you avoid a roller replacement.

Know When Refurbishing Is Necessary

There is going to be a point when your urethane rollers stop moving as smoothly as they used to and thus need to be thoroughly examined before being used again. They may need to be refurbished in fact, which involves renovating these rollers until they're structurally sound and perform great again — almost like new.

You just need to know when your urethane rollers reach this point and then you can respond accordingly. For instance, if your rollers have major bends or they are creating a lot of friction when moving on a conveyor system, these are generally signs a restoration is needed.

Urethane rollers are often incorporated around manufacturing sites on conveyor systems because of how well they can perform for a long time. If you're committed to getting the most out of these roller solutions, you need to perform frequent inspections and intervene with professional adjustments periodically.